IBM 866441Y Hardware Maintenance Manual - Page 207
Beep/Symptom, Run Diagnostics
![]() |
UPC - 087944522201
View all IBM 866441Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
Beep/Symptom 3-1-2 (Interval timer channel 2 failed) 3-1-3 (RAM test failed above address 0FFFFH) 3-1-4 (Time-Of-Day clock failed) 3-2-1 (Serial port failed) 3-2-2 (Parallel port failed) 3-2-3 (Math coprocessor failed) 3-2-4 (Failure comparing CMOS memory size against actual) 3-3-1 (Memory size mismatch occurred) 3-3-2 (Critical SMBUS error occurred) 3-3-3 (No memory in system) Two Short Beeps (Information only, the configuration has changed) Three Short Beeps One Continuous Beep Repeating Short Beeps One Long and One Short Beep FRU/Action 1. System Board 1. DIMM 2. Processor Board 3. System Board 1. Battery 2. System Board 1. System Board 1. System Board 1. Optional Processor (if installed) 2. Processor 3. Processor Board 1. DIMM 2. Battery 1. DIMM 2. Battery 1. Disconnect the server power cord from outlet, wait 30 seconds and retry. 2. Memory DIMMs 3. Processor Board 1. Install or reseat the memory modules 2. DIMMs 3. Processor Board 4. System Board 1. Run Diagnostics 2. Run Configuration/Setup 3. Processor Board 1. DIMM 2. Processor Board 3. System Board 1. Processor 2. Optional Processor (if installed) 3. Processor Board 4. System Board 1. Keyboard 2. System Board 1. Video adapter (if present) 2. System Board 3. Netfinity 5600 - Type 8664 199
![](/manual_guide/products/ibm-86644ry-hardware-maintenance-manual-70136a6/207.png)