IBM 866441Y Hardware Maintenance Manual - Page 216
Error symptoms, Clean the CD
UPC - 087944522201
View all IBM 866441Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
Error symptoms Error Symptom CD is not working properly. CD-ROM drive tray is not working. (The server must be powered-on.) If the server is on and the tray does not eject, CD-ROM drive is not recognized. Diskette drive in-use light stays on, or the system bypasses the diskette drive. Monitor problems (general) Some IBM monitors have their own self-tests. If you suspect a problem with the monitor, refer to the information that comes with the monitor for adjusting and testing instructions. FRU/Action 1. Clean the CD 2. Try alternate CD 3. Clean the optical-head lens. 4. CD-ROM Drive 1. Insert the end of a paper clip into the manual tray-release opening. 2. CD-ROM Drive 1. Run Configuration/Setup, enabled primary IDE channel. 2. Check cables and jumpers. 3. Check for correct device driver. If there is a diskette in the drive, verify that: 1. The diskette drive is enabled in the Configuration/Setup Utility. 2. The diskette is good and not damaged. (Try another diskette if you have one.) 3. The diskette is inserted correctly in the drive. 4. The diskette contains the necessary files to start the server. 5. The software program is OK. If the diskette drive in-use light stays on, or the system continues to bypass the diskette drive, replace the diskette drive. 1. Monitor 2. Display Adapter/System Board 208 Netfinity Server HMM