IBM 866441Y Hardware Maintenance Manual - Page 190
Reposition the CD-ROM drive and any other drives or, filler panels in the non-hot-swap bays for rack
![]() |
UPC - 087944522201
View all IBM 866441Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
h. Place the notched end of the operator LED panel bracket into the opening 1 , aligning the LEDs so that they show through the holes in the server front. i. Press the other end of the bracket through the other opening 2 until the bracket clicks into place. 12. Replace the front fan assemblies, ensuring that the cables clear the fans and do not block the flow of air. 13. Replace the hard disk drives. Place the hard disk drive assigned to SCSI ID 0 in the left-most position. The remaining SCSI IDs are assigned in order from left to right. 14. Reposition the CD-ROM drive and any other drives or filler panels in the non-hot-swap bays for rack operation. a. Remove the power and signal cables from the back of the drives in the non-hot-swap bays. b. Pull the drives and filler panels out of the server. c. Orient the drives so that they are top-side-up and horizontal. d. Insert the drives in the server. e. Insert filler panels into any unused non-hot-swap bays. 182 Netfinity Server HMM
![](/manual_guide/products/ibm-86644ry-hardware-maintenance-manual-70136a6/190.png)