IBM 866441Y Hardware Maintenance Manual - Page 148
Replace the cover., If the FAN LED is lit, reseat the fan.
 |
UPC - 087944522201
View all IBM 866441Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
the diagnostic LED panel (see "Diagnostics panel LEDs" on page 196) and the LEDs located on the fan assemblies. 3. Remove the fan assembly from the server by pressing the orange release latch ( 3 , 6 , or 8 ) for the fan and pulling the fan away from the server. 4. Slide the replacement fan assembly into the server until it clicks into place. 5. Verify that the FAN LED on the diagnostic panel is not lit. If the FAN LED is lit, reseat the fan. 6. Replace the cover. For a tower model, see "Completing the tower model installation" on page 141. For a rack model, see "Completing the rack model installation" on page 144. 140 Netfinity Server HMM
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143 -
144 -
145 -
146 -
147 -
148 -
149 -
150 -
151 -
152 -
153 -
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
 |
 |
the diagnostic LED panel (see “Diagnostics panel
LEDs” on page
196) and the LEDs located on the fan
assemblies.
3.
Remove the fan assembly from the server by
pressing the orange release latch (
±3²
,
±6²
, or
±8²
)
for the fan and pulling the fan away from the server.
4.
Slide the replacement fan assembly into the server
until it clicks into place.
5.
Verify that the FAN LED on the diagnostic panel is
not lit.
If the FAN LED is lit, reseat the fan.
6.
Replace the cover.
For a tower model, see
“Completing the tower model installation” on
page
141.
For a rack model, see “Completing the
rack model installation” on page
144.
140
Netfinity Server HMM