IBM 866441Y Hardware Maintenance Manual - Page 225
Ethernet controller messages, Novell NetWare or IntraNetWare server ODI, driver messages
![]() |
UPC - 087944522201
View all IBM 866441Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
Ethernet controller messages The integrated Ethernet controller might display messages from the following device drivers: Novell NetWare or IntraNetWare Server ODI NDIS Adapter for level 2.01 (OS/2) NDIS Adapter for level 4.0 (Windows NT) SCO UNIX LLI Novell NetWare or IntraNetWare server ODI driver messages: This section contains the error messages for the Novell NetWare or IntraNetWare server ODI driver. The explanation and recommended action are included with each message. PCNTNW-NW-026 The MSM is unable to parse a required custom keyword. Explanation: The user entered an incorrect parameter keyword. Action: Reload the driver using the correct keyword. PCNTNW-NW-054 The adapter did not respond to the initialization command. Explanation: The adapter did not respond when the driver tried to initialize it. Action: Verify that the Ethernet controller is enabled. (See "PCI Slot/Device Information" on page 35.) If the Ethernet controller is enabled, go to "General checkout" on page 6 to run the diagnostic programs. PCNTNW-NW-058 The adapter did not respond to the initialization command. Explanation: The interrupt request (IRQ) setting might not be valid or the EEPROM information might be incorrect. Action: Make sure the IRQ settings are correct in the Configuration/Setup Utility program. See "PCI Slot/Device Information" on page 35 for information on setting the interrupt requests. If the IRQ settings are correct, replace the ethernet controller. PCNTNW-NW-066 The cable might be disconnected from the adapter. Explanation: The cable might be disconnected from the server Ethernet port. Action: Verify that a cable is connected to the Ethernet port. PCNTNW-NW-071 The matching virtual adapter could not be found. Explanation: You tried to load another instance of the driver with a different I/O address. This new adapter could not be found. Action: Verify that you installed an IBM Netfinity 10/100 Fault Tolerant Adapter and make sure that the adapter is seated correctly. If the adapter is seated correctly, replace the adapter. PCNTNW-NW-072 A resource tag is unavailable. Explanation: The driver tried to allocate some resources that were not available. Action: Add or free some memory in the server. Then, restart the server. PCNTNW-NW-073 Unable to allocate memory. Explanation: The driver failed to allocate the memory needed for normal operation. Action: Add more memory, or free some memory resources in the server. Then, restart the server. Netfinity 5600 - Type 8664 217
![](/manual_guide/products/ibm-86644ry-hardware-maintenance-manual-70136a6/225.png)