IBM 866441Y Hardware Maintenance Manual - Page 157
Video port, Keyboard port, See Devices and I/O
UPC - 087944522201
View all IBM 866441Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
When you turn on the server, the POST routine assigns the parallel port a specific port address. You can change the parallel-port assignment by using the Configuration/Setup Utility program. See "Devices and I/O Ports" on page 28. Video port: The system board in the server has one SVGA video port. This port is used to attach a video monitor. The video port has a 15-pin analog connector on the back of the server. (See "Input/output connectors and expansion slots" on page 91 for the location of the connector.) 5 1 15 11 The following table shows the pin-number assignments for the video connector. Table 4. Video port pin-number assignments Pin Signal 1 Red 2 Green or monochrome 3 Blue 4 Monitor ID bit 2 5 Ground 6 Ground 7 Ground 8 Ground 9 +5 V dc 10 Ground 11 Monitor ID bit 0 12 DDC SDA 13 Horizontal synchronization (Hsync) 14 Vertical synchronization (Vsync) 15 DDC SCL Keyboard port: The system board has one keyboard port. (See "Input/output connectors and expansion slots" on page 91 for the location of the connector.) 6 4 2 5 3 1 Netfinity 5600 - Type 8664 149