IBM 92296GU User Guide - Page 65
Installing, security, cable, Completing, installation, Replacing, baffle
![]() |
UPC - 000435957559
View all IBM 92296GU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Installing a security cable To help prevent hardware theft, you can thread a security cable through the cable loop on the rear of the computer. After you add the security cable, make sure that it does not interfere with other cables that are connected to the computer. Before you begin, obtain the following items: v A security cable v A lock, such as a combination lock or padlock To install a security cable, complete the following steps: 1. Thread the cable through the cable loop and around an object that is not part of or permanently secured to the building structure or foundation and from which the cable cannot be removed. 2. Fasten the cable ends together with a lock. Make sure that the cable does not interfere with other cables that are connected to the computer. Cable loop Completing the installation To complete the installation, reinstall the bezel, reinstall the side cover, and reconnect all the external cables. Replacing the air baffle To replace the air baffle, complete the following steps: 1. Place the air baffle directly over the front fan unit. 2. Press the air baffle down until it snaps in place over the front fan unit. When the air baffle is correctly seated, the right edge of the air baffle rests on the left edge of the heat sink. Chapter 4. Installing optional devices 53
![](/manual_guide/products/ibm-92296gu-user-guide-78acf53/65.png)