IBM 92296GU User Guide - Page 66
Replacing, internal, drive-bay, bracket
UPC - 000435957559
View all IBM 92296GU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Release tab Handle Replacing the internal drive-bay bracket To install the internal drive-bay bracket, complete the following steps: 1. Place the top edge of the internal drive-bay bracket into place on the chassis. Rotate the drive-bay bracket downward until it engages in the chassis. 2. Install the two screws that fasten the top edge of the drive-bay bracket to the chassis. 3. If you removed the hard disk drive while you removed the drive-bay bracket, install the hard disk drive now (see "Installing a drive in bay 4, 5, or 6" on page 47). 4. Reconnect the signal and power cables to the hard disk drive in the drive-bay bracket. 54 IBM IntelliStation M Pro Type 9229: User's Guide
Handle
Release tab
Replacing
the
internal
drive-bay
bracket
To
install
the
internal
drive-bay
bracket,
complete
the
following
steps:
1.
Place
the
top
edge
of
the
internal
drive-bay
bracket
into
place
on
the
chassis.
Rotate
the
drive-bay
bracket
downward
until
it
engages
in
the
chassis.
2.
Install
the
two
screws
that
fasten
the
top
edge
of
the
drive-bay
bracket
to
the
chassis.
3.
If
you
removed
the
hard
disk
drive
while
you
removed
the
drive-bay
bracket,
install
the
hard
disk
drive
now
(see
“Installing
a
drive
in
bay
4,
5,
or
6”
on
page
47).
4.
Reconnect
the
signal
and
power
cables
to
the
hard
disk
drive
in
the
drive-bay
bracket.
54
IBM
IntelliStation
M
Pro
Type
9229:
User’s
Guide