IBM 954840U User Guide - Page 29
ThinkPad Configuration for DOS, Display Device, View Angle, Device, Default, Status, Start, DOS Prompt
![]() |
View all IBM 954840U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Title: C79DMMST CreationDate: 07/16/97 13:09:22 3 The Display Device buttons Click on one of these buttons to set the display output type to the LCD, external display, or to both. When making a presentation, you can click on the presentation button to disable any system timers, such as the LCD turn-off timer or the power-save mode timers. 4 Click on the left button for Help. Click on the right button to save the changes made and to Exit the ThinkPad Configuration window. 5 The View Angle buttons Click on the front view or rear view buttons to display the hardware feature locations. 6 The Device buttons Click on the button of your choice from the window; then set the options for that device from the window that appears. When the device is enabled, the red indicator next to the button is lit. Otherwise, it stays off. 7 The Default button Click on this button to set the default values for each option and to cancel the changes you just made. 8 The Status bar The device name and its status appears in the status bar when you place the cursor on a device button. Only the top portion of the window is displayed when you click on the triangular minimize button in the top-right corner. ThinkPad Configuration for DOS You can use the ThinkPad Configuration program from the DOS prompt. To start the program, do the following: 1 Click on Start and the DOS Prompt icon. The DOS prompt screen appears. 2 Type PS2 ? at the c:ThinkPad> prompt. The "ThinkPad Configuration" online help screen appears: Chapter 2. Fine-Tuning Your Computer 2-5
![](/manual_guide/products/ibm-954840u-user-guide-aa82c94/29.png)