IBM QS21 User Guide - Page 38
Opening, removing, blade, server, cover, Removing, BladeCenter, Express, Expansion
UPC - 883436016940
View all IBM QS21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Opening and removing the blade server cover You must open the blade server cover to access, install or remove any of the replaceable items except the front bezel assembly. Cover pins Cover release Cover release Figure 9. Opening the blade server cover Complete the following steps to open the blade server cover: 1. Read the safety information beginning on page vii and "Installation guidelines" on page 19. 2. Carefully place the blade server on a flat, static-protective surface, with the cover side up. 3. Press the blue blade cover release on each side of the blade server and lift the outer cover open (see Figure 9). 4. If you want to remove the cover, carefully lift it from the cover pins and set it aside (see Figure 9). Statement 21: CAUTION: Hazardous energy is present when the blade server is connected to the power source. Always replace the blade cover before installing the blade server. Removing the BladeCenter PCI Express I/O Expansion Unit You must remove BladeCenter PCI Express I/O Expansion Unit, if installed, to access, install or remove any of the replaceable items except the front bezel assembly. 22 QS21 Installation and User's Guide