IBM QS21 User Guide - Page 84
Adapter, Configuration
UPC - 883436016940
View all IBM QS21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
PowerPC Firmware Version HEAD SLOF-SMS 1.6 (c) Copyright IBM Corp. 2000,2005,2007 All rights reserved. IP Parameters NET /axon@10000000000/plb5/plb4/pcix@4000004600000000/ethernet@1 1. Client IP Address [000.000.000.000] 2. Server IP Address [000.000.000.000] 3. Gateway IP Address [000.000.000.000] 4. Subnet Mask [255.255.255.000] Navigation Keys: M = return to Main Menu ESC key = return to previous screen X = eXit System Management Services Type menu item number and press Enter or select Navigation key : Select an item from the list and enter the appropriate address and subnet mask. Press Enter when you have finished each item. To save the information and return to the Main Menu, press M. If you wish to cancel and return to the main menu, press Esc. Adapter Configuration This allows you to set network parameters for the adapter. PowerPC Firmware Version HEAD SLOF-SMS 1.6 (c) Copyright IBM Corp. 2000,2005,2007 All rights reserved Adapter Configuration NET /axon@10000000000/plb5/plb4/pcix@4000004600000000/ethernet@1 1. Speed, Duplex 2. Spanning Tree Enabled 3. Protocol Navigation Keys: M = return to Main Menu ESC key = return to previous screen X = eXit System Management Services Type menu item number and press Enter or select Navigation key : Do not change these settings unless required by your network. The defaults are: v Speed: detected automatically v Spanning Tree Enabled: disabled Only change this if your network uses the Spanning-Tree Protocol link management protocol. v Protocol: standard. IEE 802.3 is the only other option. 68 QS21 Installation and User's Guide