IBM QS21 User Guide - Page 60
Using, update, package, Advanced, Management, Module
UPC - 883436016940
View all IBM QS21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
The Linux executable package allows you to run the firmware update without exiting the Linux environment. In addition, when you run it with the -x (extract) option, the package allows you to extract the Linux update files to a specified location. Using the BMC update package If you have not done so already you must install RHEL 5.2 or later before you can update the BMC firmware from the Linux command prompt. Complete the following steps to update the BMC firmware from the Linux command prompt: 1. Check the README that comes with the BMC firmware as it contains specific information about that particular firmware release. 2. Boot the blade server and the operating system. 3. Download the package from the IBM support site at http://www.ibm.com/support/ us/en/. The update package has a .sh extension. 4. Change to the directory where you have downloaded the package. 5. Run the package using the -s option. 6. Reboot the blade server. Using the Advanced Management Module Complete the following steps to update the BMC firmware: 1. Download the BMC firmware image file from http://www.ibm.com/support/us/en/ to a suitable location on a server that is accessible on the network. The BMC firmware image file name has the format BNBT.pkt. 2. Power off the blade server you want to update. 3. Log in to the Advanced Management Module Web interface. 4. Click Firmware Update from the Blade Tasks submenu at the left of your screen. The following screen appears: 44 QS21 Installation and User's Guide