IBM QS21 User Guide - Page 41
Attention
UPC - 883436016940
View all IBM QS21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Locking clip Connector Locator pin holes Ball socket Figure 13. InfiniBand card reverse view 8. Slide the InfiniBand card locator pin holes over the expansion card locator pins. The card rests on the locator pins. Locator pin Expansion card Expansion connector cover Expansion card standoff Figure 14. Positioning the InfiniBand card 9. Check that the ball socket on the card is over the corresponding ball stud on the main board then carefully press the InfiniBand card into position. Use the blue areas only to avoid damage to the card. 10. Check that the blue locking clip has locked into position. 11. If you do not want to install any other options, replace the cover and insert the BladeCenter QS21 into the BladeCenter unit. Attention: The connectors on the system board and the InfiniBand card are not designed for repeated removal or replacement of components. Avoid removing the InfiniBand card once it is in position, Chapter 4. Installing and removing replaceable units 25