Icom IP501M Operating Guide - Page 22
Using the Set mode, Basic Set mode, Detailed Set mode
View all Icom IP501M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
4 set mode Using the Set mode You can use the Set mode to set infrequently changed values or function settings. The transceiver has 2 types of Set mode, as shown below. LLYou cannot transmit or receive while the transceiver is in the Set mode. DDBasic Set mode zz Hold down [FUNC] for 3 seconds to enter the Set mode. ••"SET" is displayed. DDDetailed Set mode 1. Hold down [FUNC] for 3 seconds to enter the Set mode. ••"SET" is displayed. 2. Hold down [FUNC] for 3 seconds again to enter the Detailed Set mode. ••"SET (Detail)" is displayed. DDUsing the Set mode 1. Push [FUNC] or [Address] to select an item. 2. Rotate [DIAL] to select an option. LLPushing [Call History] may be required to apply the selected option. See page 4-3 to 4-6 for details. 3. Push [PTT] or [CLR/Lock] to exit the Set mode. SET LOG - - - SET(Detail) LOG - - - 4-2