Icom IP501M Operating Guide - Page 25
BT Only, BT & SP, Always Connect or Auto
![]() |
View all Icom IP501M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
4 set mode Set mode items The shaded items are also displayed in the Basic Set mode. LLItems or default values may be different, depending on the transceiverʼs version or presettings. Ask your dealer for details. Item Description Option/range BT Auto Connect*1 Selects whether or not to automatically connect a Enable or Disable Bluetooth device. BT Sync Vol.*1 Selects whether or not to synchronize the Bluetooth Disable or Enable headsetʼs volume level with the transceiverʼs volume level. LLWhen "Enableˮ is selected, the Bluetooth headset volume can be set by rotating [DIAL]. BT Connect Type*1 Selects the Synchronous Connection-Oriented Always Connect or Auto (SCO) link*4 connection type of a Bluetooth Disconnect headset. When "Auto Disconnect" is selected, the SCO link is automatically disconnected after 2 seconds. *4A Bluetooth link for voice communication. LLThis setting is valid only when a Bluetooth device other than a VS-3 is used. LLWhen this item is set to "Auto Disconnect," the VOX function is not usable. PTT & Mic Switch*1 Enables the user to select which microphone to Auto, Bluetooth Mic, or use. Radio Mic LLWhen this item is set to "Auto," transmits the audio from the device whose [PTT] is pushed. BT AF Output*1 Selects the AF Output device when a Bluetooth BT Only, BT & SP headset is connected. Default Enable Disable Always Connect Auto BT Only BT Echo Canceller*1 Selects whether or not to enable the Bluetooth headsetʼs Echo Canceller. Enable or Disable Enable BT E-Cancel Gain*1 Sets the Echo Canceller input gain for a Bluetooth -40 dB ~ +40 dB headset. 0 dB BT E-Cancel Delay*1 Sets the Echo Canceller delay for a Bluetooth headset. BT Noise Cancel*1 Selects whether or not to enable the Bluetooth headsetʼs Noise Canceller. 0milliseconds ~ 160milliseconds Enable or Disable 35milliseconds Enable BT Power Save*1 Selects whether or not to enable the Bluetooth headsetʼs Power Save function. Disable or Enable LLWhen "Enableˮ is selected, the Power Save function automatically activates after 2 minutes of no communication. Disable *1Displayed only when "Enable" is selected in the "Bluetooth" item. 4-5
![](/manual_guide/products/icom-ip501m-operating-guide-e6cd4f5/25.png)