Icom IP501M Operating Guide - Page 33

5 OPTIONS Using the Bluetooth® device ■■Pairing with a Bluetooth device This is an example of connecting the transceiver to a VS-3 Bluetooth headset. 1. Turning ON the transceiver's Bluetooth function 1. Hold down [FUNC] for 3 seconds to enter the Set mode. 2. Push [FUNC] or [Address] several times to select "Bluetooth." 3. Rotate [DIAL] to select "Enable," and then push [Call History] to turn ON the Bluetooth function. SET Bluetooth Enable 2. Entering the VS-3 Pairing mode 1. Confirm the VS-3 is turned OFF. 2. Hold down [PWR] for 6 seconds. ••The indicator quickly blinks red then blue, and then the headset enters the Pairing mode. NOTE: ••Charge the VS-3 before operating. ••The VS-3 starts up in the Pairing mode when its Bluetooth function is ON, but no bluetooth device is entered in its Pairing list. [PWR] Indicator 3. Pairing and connecting the Bluetooth device 1. On the transceiver, select "Search BT Device" in the Set mode, and then push [Call History]. ••The transceiver searches for a Bluetooth device. LLPush [CLR/Lock] to cancel searching. ••If found, the device's name and BD address are displayed on the screen. (Example: ICOM BT-002) 2. Rotate [DIAL] to select the headset to pair and connect, and then push [Call History]. ••"Connect" is displayed when the pairing has completed. SET Search BT Device ICOM BT- 002 : 00 SET Search BT Device Connect 3. Push [CLR/Lock] to exit the Set mode and return to the Standby screen. ••" " is displayed if the headset has correctly paired. ■■Settings for the Bluetooth function You can customize the transceiver's Bluetooth settings in the Detailed Set mode. See the Set mode section for details. 5-6