Icom M605 User Manual - Page 104
Antenna, Fuse replacement, Cleaning, Connecting the RC-M600
View all Icom M605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
12 CONNECTIONS AND MAINTENANCE ■■ Connections (Continued) DDConnecting the RC-M600 The RC-M600 command head has the same front panel as the transceiver. Connect the RC-M600 using the OPC-2383 control cable. You can operate the transceiver from the distance. 1. Connect the OPC-2383's 12-pin connector to the transceiver's command microphone/command head connector. 2. Connect the other side of OPC-2383 to the RC-M600's 10-pin connector. 3. Connect to a 13.8 V DC power source using the DC power cable supplied with the command head. 4. Connect the external speaker through the supplied 2-pin connector. RC-M600's rear panel ■■Antenna A key element in the performance of any communication system is the antenna. Ask your dealer about antennas and the best place to mount them. ■■Fuse replacement One fuse is installed in the supplied DC power cable. If the fuse blows, track down the source of the problem, repair it, and replace the damaged fuse with a new one of the proper rating. Fuse rating: 10 A (+) (-) DC power connector 10-pin connector 2-pin connector External speaker connector ■■Cleaning If the transceiver becomes dusty or dirty, wipe it clean with a soft, dry cloth. DO NOT use harsh solvents such as Benzine or alcohol, as they will damage transceiver's surfaces. 94