Icom M605 User Manual - Page 55
Receiving DSC calls, Receiving a Distress Call
![]() |
View all Icom M605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
DSC OPERATION 8 ■■Receiving DSC calls NOTE: After receiving a DSC call " " continuously blinks when the transceiver has DSC call. or an unread DSC message in the Received Call Log. (p. 56) 1. When a Distress call is received: • Alarm sounds. • The following screen is displayed and the backlight blinks. • " " blinks. DDReceiving a Distress Call IMPORTANT! Distress call reception should stop after one sequence because the coast station should send back an 2. Push any [Alarm Off] . 'acknowledgement' to the ship. 3. Select your action. If the distress call continues, even after the coast station sends back an 'acknowledgement,' the ship in distress may not receive the acknowledgement. [Ignore]*: Ignores the Call and returns to the Main screen. * Displayed only when "Single" is selected in the PROCEDURE menu. (p. 62) 1 [Hold]: Holds the RX call task, and 2 returns to the Main screen. 3 [Pause]: Pauses the countdown. • To restart the countdown, 4 push [Resume] . 5 [Accept]: E nters the DSC Task mode. To send the 6 acknowledgement, push [Accept] . 7 8 9 10 11 12 DSC Task mode (pp. 29, 30) • Automatically selects Channel 16, and 13 then you should monitor it, because a coast station may require assistance. 14 • R otate [CH/ENT] to view the call 15 contents. 16 45
![](/manual_guide/products/icom-m605-user-manual-ea4d5c3/55.png)