Icom M605 User Manual - Page 96
Radio Settings, Power Switch from sub unit, Scan Type
View all Icom M605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
11 MENU ITEMS DDPower Switch from sub unit (Configuration > Power SW from Sub Unit:) Select weather or not to turn OFF the transceiver at same time that you turn OFF the command microphone or command head. (Default: All Units) LLThe optional HM-195 or HM-229 command microphone or RC-M600 command head is required to use this function. ■■Radio Settings DDScan Type (Except for the Dutch version) (Radio Settings > Scan Type) Select the Scan type to locate signals. • Normal Scan: Sequentially searches all Favorite channels. (Default for the USA version.) • Priority Scan: Sequentially searches all Favorite channels, while also monitoring Channel 16. (Default for the transceiver other than USA version.) All Units: When you turn OFF the command microphone or command head, the transceiver is turned OFF at same time. Own Unit: T he transceiver is not turned OFF even if you turn OFF the command microphone or command head. DDScan Timer (Except for the Dutch version) (Radio Settings > Scan Timer) Turn the Scan Resume timer ON or OFF. • On: When a signal is detected on a channel, the scan pauses for 5 seconds, and then resumes. If the signal disappears in less than 5 seconds, the scan immediately resumes. • Off: When a signal is detected on a channel, the scan pauses until the signal disappears, and then resumes. (Default) 86