Icom M605 User Manual - Page 107

MB-75 installation - template

Get Icom M605 PDF manuals and user guides View all Icom M605 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 107 highlights

CONNECTIONS AND MAINTENANCE 12 ■■MB-75 installation 1 An optional MB-75 flush mount kit is used to mount the 2 transceiver to a flat surface such as an instrument panel. 3 CAUTION: Keep the transceiver and microphone at least 4 1 meter (3.3 feet) away from your vessel's magnetic navigation compass. Supplied bolt 5 6 1. U sing the template comes with the transceiver, 7 carefully cut a hole in the instrument panel, or wherever you plan to mount the transceiver. Clamp 8 2. Slide the transceiver through the hole, as shown below. 9 6. Tighten the end bolts on the clamps (rotate clockwise) so that they press firmly against the inside of the 10 instrument control panel. (Torque: 0.6 N•m) 11 7. Tighten the locking nuts (rotate counterclockwise) so that the transceiver is securely mounted in position, as 12 shown below. 8. Connect the antenna and power cable, then return the 13 instrument control panel to its original place. 14 15 3. A ttach the 2 supplied (M5 × 8 mm) bolts on both sides of the transceiver. 4. Attach the clamps on both sides of the transceiver. 5. Make sure that the clamps align parallel to the transceiver's body. 16 Locking nut End bolt 97

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
97
12
CONNECTIONS AND MAINTENANCE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■
MB-75 installation
An optional MB-75
FLUSH
MOUNT
KIT
is used to mount the
transceiver to a flat surface such as an instrument panel.
CAUTION:
Keep the transceiver and microphone at least
1 meter (3.3 feet) away from your vessel’s magnetic
navigation compass.
1.
Using the template comes with the transceiver,
carefully cut a hole in the instrument panel, or wherever
you plan to mount the transceiver.
2.
Slide the transceiver through the hole, as shown below.
3.
Attach the 2 supplied (M5 × 8 mm) bolts on both sides
of the transceiver.
4.
Attach the clamps on both sides of the transceiver.
5.
Make sure that the clamps align parallel to the
transceiver’s body.
6.
Tighten the end bolts on the clamps (rotate clockwise)
so that they press firmly against the inside of the
instrument control panel. (Torque: 0.6 N•m)
7.
Tighten the locking nuts (rotate counterclockwise) so
that the transceiver is securely mounted in position, as
shown below.
8.
Connect the antenna and power cable, then return the
instrument control panel to its original place.
Supplied
bolt
Clamp
Locking
nut
End bolt