Icom M605 User Manual - Page 59
Receiving an Individual call, Enters the DSC Task
View all Icom M605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
DSC OPERATION 8 1 DDReceiving an Individual call NOTE: When the "Individual ACK" item is set to "Auto," the transceiver automatically sends an [Ignore]*: Ignores the Call and returns to the Main screen. * D isplayed only when "Single" is selected in the When you select [Accept] in step 3, you can send an acknowledgement in the DSC Task mode. To send the 2 3 4 acknowledgement. Both the TX and RX calls are stored in the Transmitted and PROCEDURE menu. (p. 62) acknowledgement, go to step 4. If you return to the Main screen 5 Received Call Logs. (pp. 56, 57) [Hold]: Holds the RX call task, without sending the acknowledgement, 6 1. When an Individual call is received: • Alarm sounds. • The following screen is displayed and the backlight blinks. • " " blinks. and returns to the Main screen. [Able]: Sends an acknowledgment without any changes. [Accept]: E nters the DSC Task mode. go to step 7. 4. P ush the key to select an acknowledgement option. 5. Push [Call] to send the Individual acknowledgement. 6. Depending on the option selected 7 8 9 10 in step 5, hold down [PTT] to 11 communicate. 7. Push [Standby] to return to 12 the Main screen. 13 2. Push any [Alarm Off] . 3. Select your action. DSC Task mode (pp. 29, 30) • R otate [CH/ENT] to view the call contents. TIP: When you send the acknowledgement, select one of three 14 options, depending on your situation. 15 See page 39 for details of the Individual acknowledgement 16 procedures. 49