Icom M605 User Manual - Page 64
Receiving a Test call, Receiving a Position, Request Call
View all Icom M605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
8 DSC OPERATION ■■ Receiving DSC calls (Continued) DDReceiving a Position Request Call NOTE: When "Position ACK" is set to "Auto," the transceiver automatically replies to the call. Both the TX and RX calls are stored in the Transmitted and Received Call Logs. (Default: Manual) 1. When a Position Request call is received: • Alarm sounds. • The following screen is displayed and the backlight blinks. [Ignore]*: Ignores the Call and returns to the Main screen. * Displayed only when "Single" is selected in the PROCEDURE menu. (p. 62) [Hold]: Holds the RX call task, and returns to the Main screen. [ACK (Unable)]: Sends an acknowledgment with no position and time data. [ACK (Able)]: Sends an acknowledgment with position and time data. [Accept]: Enters the DSC Task mode. DDReceiving a Test call NOTE: When "Test ACK" is set to "Auto," the transceiver automatically replies to the call. Both the TX and RX calls are stored in the Transmitted and Received Call Logs. (Default: Auto) 1. When a Test call is received: • Alarm sounds. • The following screen is displayed and the backlight blinks. • " " blinks. 2. Push any [Alarm Off] . 3. Select your action. 54 2. Push any [Alarm Off] . 3. Select your action. DSC Task mode (pp. 29, 30) • Rotate [CH/ENT] to view the call contents. 4. Push [Standby] to return to the Main screen. TIP: See page 42 for details of sending an acknowledgement.