Icom M605 User Manual - Page 58
Receiving a Distress Relay acknowledgement
View all Icom M605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
8 DSC OPERATION ■■ Receiving DSC calls (Continued) DDReceiving a Distress Relay acknowledgement 1. W hen a Distress Relay acknowledgement is received: • Alarm sounds. • " " blinks. • The following screen is displayed and the backlight blinks. 2. Push any [Alarm Off] . 3. Push any [Close Call RCVD Window] . DSC Task mode (pp. 29, 30) • Automatically selects Channel 16, and then you should monitor it, because a coast station may require assistance. • [PTT] is activated for voice communication via Channel 16. • R otate [CH/ENT] to view the call contents. 4. Push [Standby] to return to the Main screen. • Enters the DSC Task mode. 48
48
8
DSC OPERATION
■
Receiving DSC calls (Continued)
1.
When a Distress Relay
acknowledgement is received:
• Alarm sounds.
•
“
” blinks.
• The following screen is displayed
and the backlight blinks.
2.
Push any [Alarm Off]
.
3.
Push any [Close Call RCVD
Window]
.
• Enters the DSC Task mode.
D
Receiving a Distress Relay acknowledgement
DSC Task mode (pp. 29, 30)
• Automatically selects Channel 16, and
then you should monitor it, because a
coast station may require assistance.
• [PTT] is activated for voice
communication via Channel 16.
•
Rotate [CH/ENT] to view the call
contents.
4. Push [Standby]
to return to the
Main screen.