Icom M605 User Manual - Page 115
PROBLEM, POSSIBLE CAUSE, SOLUTION, The transceiver's Phase Lock Loop is
View all Icom M605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
TROUBLESHOOTING 14 PROBLEM POSSIBLE CAUSE SOLUTION REF. 1 Sensitivity is too low, • T he antenna is defective or the coaxial • R epair the problem and then reconnect p. 92 2 and only strong signals cable connector is shorted or cut. can be heard. to the antenna connector. 3 Communication cannot • T he antenna is defective or the coaxial • R epair the problem and then reconnect p. 92 4 be established. cable connector is shorted or cut. to the antenna connector. 5 The transceiver is • A software error has occured. • T urn OFF the transceiver, and then turn - locked up, and does it ON again. 6 not respond. The transceiver does not work. • T he transceiver's Phase Lock Loop is unlocked. • C ontact your dealer. 7 - 8 9 10 11 12 13 14 15 16 105
105
14
TROUBLESHOOTING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PROBLEM
POSSIBLE CAUSE
SOLUTION
REF.
Sensitivity is too low,
and only strong signals
can be heard.
•
The antenna is defective or the coaxial
cable connector is shorted or cut.
•
Repair the problem and then reconnect
to the antenna connector.
p. 92
Communication cannot
be established.
•
The antenna is defective or the coaxial
cable connector is shorted or cut.
•
Repair the problem and then reconnect
to the antenna connector.
p. 92
The transceiver is
locked up, and does
not respond.
• A software error has occured.
•
Turn OFF the transceiver, and then turn
it ON again.
—
The transceiver does
not work.
•
The transceiver's Phase Lock Loop is
unlocked.
•
Contact your dealer.
—