Icom M605 User Manual - Page 73
Making an Individual call using an AIS transponder
View all Icom M605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
DSC OPERATION 8 ■■Making an Individual call using an AIS transponder 1 When the optional MA-500TR class b ais transponder 2 is connected to your transceiver, you can transmit an 3 Individual DSC call to a selected AIS target, without entering the target's MMSI code. In this case, the call type is 4 automatically set to Routine. See page 92 for connecting instructions. 5 6 NOTE: To ensure correct operation of the DSC function, make sure you correctly set the CH70 SQL Level. (p. 61) 7 3. P ush [DSC] to transmit an Individual DSC call to the 8 1. Select an AIS target on the plotter, target list or danger AIS target. ••If Channel 70 is busy, the transceiver stands by until the 9 list display. ••You can also go to the next step whenever the detail screen of the AIS target is displayed. channel becomes clear. 10 ••If the transceiver cannot make the call, the transponder will display "DSC Transmission FAILED." 11 ••Confirm the transceiver is in the normal operating mode. Otherwise, you cannot make an Individual DSC call using the 12 transponder. 13 2. Push [DSC] to display the Voice channel selection screen, and then push [Y]/[Z] to select a Voice 14 channel.* 15 ••Voice channels are already preset into the transponder in the recommended order. 16 * When a coast station is selected in step 1, a Voice channel will be specified by the coast station, therefore you cannot change the channel. The transponder will display "Voice Channel is specified by the Base station," in this case. 63