Icom M803 Instruction Manual - Page 10
PANEL DESCRIPTION, Main unit front panel
![]() |
View all Icom M803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2 PANEL DESCRIPTION ■■Main unit front panel 1 2 3 4 8 7 6 5 1 SPEAKER JACK [EXT-SP] (p. 69) Connects to the optional SP-24 or an external speaker. NOTE: When an external speaker is connected, the internal speaker is automatically muted. 2 CONTROLLER CONNECTOR [CONTROLLER] (p. 69) Connects to the supplied remote controller. 3 ACCESSORY CONNECTOR [ACC] (pp. 14, 78) Connects to a CW keyer or an FSK terminal unit. 4 MAINTENANCE PORT [MAINTENANCE] Connects to a USB cable for programming the transceiver. LLThis connector is only used by your dealer. 5 GPS ANTENNA CONNECTOR [GPS-ANT] (p. 69) Connects to the supplied GPS antenna. NOTE: Install the GPS antenna where it has a clear view to receive signals from satellites. 6 MODEM CONNECTOR [AF/MOD] (pp. 69, 79) Connects to an e-mail modem, NBDP (Narrow Band Direct Printing) or FAX system through an RS-232C cable (D-sub 9-pin). 7 REMOTE CONNECTOR [REMOTE] (pp. 69, 79) Connects to a PC through an RS-232C cable (D-sub 9-pin) for remote control. 8 GPS JACK [GPS-DATA] (pp. 69, 79) Connects to a GPS receiver to input position and UTC data for DSC operations. (NMEA0183 ver. 4.10 format) LLAn NMEA ver. 4.10 (sentence formatter: GGA, GLL, GNS, RMC, VTG) compatible GPS receiver is required. Ask your dealer about suitable GPS receivers. 2
![](/manual_guide/products/icom-m803-instruction-manual-0fcc764/10.png)