Icom M803 Instruction Manual - Page 77
Connecting the remote control cable, Front panel connections, GLL, GNS, RMC, VTG
![]() |
View all Icom M803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
9 CONNECTIONS AND INSTALLATION DDConnecting the remote control cable 1. Insert the remote control cable's connector into the main unit jack on the remote controller's back panel. 2. Rotate the connector clockwise until it is completely tightened. CAUTION: Be sure that the control cable's connector is screwed to the remote controller's back panel completely. Otherwise, the remote controller may lose its waterproof protection. Remote controller cable's connector DDFront panel connections CAUTION: When you connect an external unit, such as PC or e-mail modem, they must be properly grounded. (pp. 71 and 79) NOTE: 9 •• When an external speaker is connected, the internal speaker is automatically muted. When a PC is connected: •• The PC being operated has priority at any given time. •• The remote controller is inhibited. Push on the remote controller screen to resume operation with it. (p. 15) •• The PC being operated automatically updates the settings of the remote controller. SP-24 (Purchase separately) Position and time data (NMEA0183 ver. 4.10, Sentence formatter: GGA, GLL, GNS, RMC, VTG) 12V battery E-mail modem, NBDP (Narrow Band Direct Printing), or FAX systems GPS antenna NOTE: Install the GPS antenna where it has a clear view to receive signals from satellites. 69
![](/manual_guide/products/icom-m803-instruction-manual-0fcc764/77.png)