Icom M803 Instruction Manual - Page 28
Setting a temporary operating frequency, BE SURE
View all Icom M803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
6 OTHER FUNCTIONS AND OPERATIONS ■■Setting a temporary operating frequency You can temporarily change the operating frequency of the selected channel. The frequency returns to the preset value after you select another channel, or turn OFF the transceiver. 1. Select a channel that is programmed near the frequency you want to receive. 2. Push [RX/TX] to select the RX mode. •• The RX icon lights blue. 3. Enter the desired receive frequency. 5. Enter the desired transmit frequency directly by using the Keypad key. Push TIP: •• Select the digit using [◄] and [►], and change the value using [▲] and [▼], or rotating [CH/ GRP]. •• When you select the digit using [◄] and [►], is displayed above the selected digit. •• You can enter a frequency directly by using the Keypad key. NOTE: •• If you enter a frequency that is out of the frequency range, an error beep sounds, and it automatically returns to the preset frequency. •• If you enter a frequency using the Keypad key and 10 seconds have passed without pressing [ENT], the frequency automatically returns to the preset value. •• BE SURE to push [ENT] after enter the frequency directly by using the Keypad key. Example: E ntering 6520.0 kHz [6] → [5] → [2] → [0] → [0] → [ENT] 4. Push [RX/TX] to select the TX mode. •• The TX icon lights blue. LLSee the NOTE in step 3 to enter. 6. Push [RX/TX]. TIP: •• If you want to save the entered frequency: 1. Push after the desired frequency is entered. •• "Are You Sure?" is displayed. 2. Push . •• The setting is saved and return to the previous screen. 3. Push [CLR]. •• If you want to change and save the frequency and other settings of the selected channel, push to open the Channel Edit screen. See the next page for details. •• Push to change the operating mode to USB, AM, LSB, AFSK, FSK, or CW. 20