Icom M803 Instruction Manual - Page 23
e-mail operation, Operation, e-mail Filter
![]() |
View all Icom M803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
BASIC OPERATION 5 ■■e-mail operation The IC-M803 is ready for HF e-mail operation- up to 160 e-mail frequency channels, and a connection terminal for an e-mail modem are available. Independent e-mail frequencies with operating mode and filter settings can be selected with a push of a button, or group/channel selector rotation, for simple operation. DDOperation 1. Connect your PC through an e-mail modem to [AF/MOD] on the IC-M803 main unit front panel. LLSee page 69 for connection details. 2. Start up the e-mail application. LLFirst, set up the necessary information given from your provider for e-mail operation. 3. Push [◄] or [►] until is displayed in the Software Key area. 4. Push then rotate [CH/GRP], or push [▲] or [▼] to select the desired e-mail channel. NOTE: •• For e-mail operation, you MUST make a contract with an HF e-mail provider and purchase an e-mail modem from the provider, or your dealer. E-mail frequencies may need to be set by your dealer, depending on your modem selection. Ask your dealer for details. •• When a PC is connected, the remote controller is inhibited and the screen as shown below is displayed. Push to resume 5 operation with the remote controller. •• When an e-mail CH is selected, the Voice scrambler function cannot be turned ON. LL[GRP] changes in 20 channel steps. LLSelectable e-mail frequencies may differ, depending on your provider. 5. Follow the e-mail application instructions for operation. DDe-mail Filter When an e-mail CH is selected, the filter type of the selected channel can be changed to Wide, Middle, or Narrow. 1. Push [◄] or [►] until is displayed in the Software Key area. 2. Push . •• The filter width of the selected e-mail channel is changed. 15
![](/manual_guide/products/icom-m803-instruction-manual-0fcc764/23.png)