Icom M803 Instruction Manual - Page 58
Receiving a Group call, When receiving ACK New CH, When a Group call is received
![]() |
View all Icom M803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
7 DSC OPERATION ■■Receiving DSC calls (other) DDReceiving an Individual Acknowledgment (continued) When receiving "ACK (New CH)": You can communicate on the frequency that the called station proposed. 1. When "ACK (New CH)" is received: •• The emergency alarm sounds until you turn it OFF. •• "Received Individual ACK" is displayed. Push to turn OFF the alarm. 2. Push . DDReceiving a Group call NOTE: To receive an Group call, push [D-SCAN] to enter the DSC watch mode. (p. 13) When a Group call is received: •• The emergency alarm sounds until you turn it OFF. •• "Received Group Call" is displayed. 1. Push to turn OFF the alarm. LLWhen "Accept after 10 sec." or "Ignore after 10 sec." is selected in "CH Auto Switch" setting, the countdown is displayed on the bottom of the window. (p. 58) After 10 seconds have passed since is pushed, the screen will move to the DSC Task screen, or return to the Main screen. Rotate 2. Push the Software Key below the intended operation. •• The Voice frequency that the called station specified is automatically selected. •• Rotate [CH/GRP] to confirm the call contents. LLSee pages 27 and 28 for details of the Software Key functions in the DSC Task mode. 3. Hold down [PTT], and then explain your situation. 4. After you have finished your conversation, push , and then to return to the Main screen. : Ignores the call and returns to the Main screen. : Puts the RX task on hold, and returns to the Main screen. : Pauses the countdown. : Enters the DSC Task mode immediately. 50
![](/manual_guide/products/icom-m803-instruction-manual-0fcc764/58.png)