Icom M803 Instruction Manual - Page 27
Clarity Control function, Voice Scrambler function, Transmit Frequency Monitor function
![]() |
View all Icom M803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
6 OTHER FUNCTIONS AND OPERATIONS Clarity Control function Automatic Gain Control OFF With the Clarity Control function, you can slightly shift The Automatic Gain Control (AGC) function prevents the receive frequency, without changing the operating distortion from strong signals and maintains a transmit frequency, to finely tune it. When the function constant output level. is ON, adjust the receive frequency. To receive weak signals, turn OFF the function. 1. Push [◄] or [►] until is displayed in the 1. Push [◄] or [►] until is displayed in the Software Key area. Software Key area. 2. Push to turn the function ON. 2. Push to turn OFF the function. •• is displayed in the Channel area. • • is displayed in the Status area. 3. Push [▲] or [▼] to adjust the receive frequency. 6 Voice Scrambler function The Voice Scrambler function enables private communications. In order to receive or transmit scrambled transmissions, you must activate the function. You also need to set the "Voice Scrambler Code" in Radio Settings. (p. 66) 1. Push [◄] or [►] until is displayed in the Software Key area. 2. Push to turn the function ON or OFF. LLWhen the function is ON, "SCRM" is displayed in the Status area. Transmit Frequency Monitor function When selecting a duplex channel, the transmit frequency differs from the receive frequency. To prevent interference to other stations, the transmit frequency should be monitored before you transmit. 1. Push [◄] or [►] until is displayed in the Software Key area. 2. Hold down to monitor the transmit frequency. •• blinks while holding down. Speaker Output When the Speaker Output function is ON, an internal speaker is turned ON. 1. Push [◄] or [►] until is displayed in the Software Key area. 2. Push to turn the function ON or OFF. LLWhen the function is ON, the Software key is changed to . LLWhen the function is OFF, the Software key is changed to , and is displayed in the Information area. 19
![](/manual_guide/products/icom-m803-instruction-manual-0fcc764/27.png)