Icom M803 Instruction Manual - Page 86
Connector information, Pin name, Description, MICROPHONE, TUNER, DC 13.6 V
![]() |
View all Icom M803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
9 CONNECTIONS AND INSTALLATION ■■Connector information ACC 76 381 54 2 Pin Pin name Description 1 CWK CW and FSK keying input. 2 AF GND Ground line for AF signal. 3 SEND Input/Output pin. Ground this pin to transmit. Modulator input. 4 MOD Usable when pin 3 is grounded. Specification Input level: -0.5 to 0.8 V - Ground level: -0.5 to 0.8 V Input current: Less than 20 mA Input impedance: More than 10 kΩ Input level: Approximately 100mV rms 5 AF AF detector output. Output impedance: Less than 4.7 kΩ Fixed, regardless of [VOL] position. Output level: 100-300 mV rms 6 NC No connection. - 7 13.6 V 13.6 V output when power is ON. Output current: Maximum 1 A 8 ALC ALC voltage input. Control voltage: -3 to 0 V Input impedance: More than 10 kΩ * DC GND Common ground. - MICROPHONE Pin 1 2 3 qu wiy ert 4 5 6 7 8 Pin name Description Specification MIC+ Audio input from the microphone Input impedance: element. 1.74 kΩ ± 20 % NC No connection. - AF1 AF output controlled with [VOL]. - Connected to pin 4 in the microphone. AF2 AF input. - Connected to pin 3 in the microphone. PTT PTT switch input. When grounded, transmits. GND Connected to the ground. - MIC- Coaxial ground for MIC+. - AF- Coaxial ground for AF1 and AF2. - TUNER 4321 Pin Pin name Description 1 KEY Key signal input. 2 START Start/Through signal output. 3 13.6 V 13.6 V output. 4 E Negative ground. Specification -0.5 to 0.8 V during tuning. Pulled up 8 V, 0 V (100 msec) as a start signal. Maximum current: 2 A Ground terminal for above signals. DC 13.6 V 123 456 Pin Pin name Description 1-3 + DC input +. 4-6 _ DC input _. Specification Maximum power consumption: 30 A typical. - 78
![](/manual_guide/products/icom-m803-instruction-manual-0fcc764/86.png)