Icom M803 Instruction Manual - Page 60
Receiving a Test call, When a Test call is received
View all Icom M803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
7 DSC OPERATION ■■Receiving DSC calls (other) DDReceiving a Geographical Area call (continued) 3. Push , and then to return to the Main screen. TIP: When you push in step 2, the countdown will be paused. Push to resume the countdown. DDReceiving a Test call NOTE: When the "Test ACK" is set to "Auto," the transceiver automatically sends an Acknowledgment. (p. 57) In that case, both the TX and RX calls are stored in the Transmitted and Received Call Logs. When a Test call is received: •• The alarm sounds until you turn it OFF. •• "Received Test Call" is displayed. 1. Push to turn OFF the alarm. 2. Push the Software Key below the intended operation. : Ignores the call and returns to the Main screen. : Puts the RX task on hold, and returns to the Main screen. : S ends an Acknowledgment "Able to comply." : Sends an Acknowledgment "Unable to comply." Rotate LLRotate [CH/GRP] to confirm the call contents. LLSee pages 27 and 28 for details of the Software Key functions in the DSC Task mode. 3. Push , and then to return to the Main screen. TIP: See page 43 for details on sending an Acknowledgment. 52