Insignia IS-HC040917 User Manual (English) - Page 15

Operating Your Receiver direction rotate the knob, main channels BASS parameter reduction when anticlockwise direction rotate the knob. 13.POWER switch Press this switch to turn on the power. Press the switch again to turn off the power. 14.MENU selector button Press the button to select a parameter of MENU. Rotate "1" "ADJUST " knob to adjust parameter selected. 15.MUTE Mute the sound. Press again to restore the audio out to the previous volume level. 16.TEST Outputs the test tone to adjust the speaker levels. selection button. Note: Input sources must be Dolby digital or Dolby Digital Surround EX-encoded. 24.Dolby Pro logic II Cinema/Music mode selection button 25.Headphone jack Allows you enjoy for private listening with headphones.When you connect headphones,no signals are output to all speakers. 26.VIDEO AUDIO input jacks Input audio and Video signals from a portable external source such as a game console. To reproduce source signals from these jacks, select VIDEO as the input source. As well as a reset button, see page 40 "Resetting Factory Presets". 17.DSP mode selection button 6 DSP modes: Live, Disco, Jazz, Classic, Hall, Rock. 18.Tuning scan button Press the SCAN+ side to tune in to a higher Frequency. Press the SCAN- side to tune in to a lower frequency. Press and keep two second minutes, scan automatically. 19.TUNER automatically tuning button Hold down the button for more than 3 seconds to start automatic preset tuning(AM/FM is detached). 20.A/B/C/D Selects one of the 4 preset station groups (A to D) when the unit is in tuner mode. 21.Stores a station in the memory Use the button to enter a station to memory. 22.2 channels stereo mode & 6 channels stereo mode selection button. 23.Dolby Digital & Dolby Digital Surround EX mode 14