Insignia IS-HC040917 User Manual (English) - Page 17

Operating YourReceiver Remote Control Function 1.Input selector Selects the input source you want to listen to or watch. 2. FM/AM band switches button Press the button to switch the reception band between FM and AM. 3. Number 1-8 button Press these button to select preset tuning channel. 4. Tuning scan button Press the SCAN+ side to tune in to a higher Frequency. Press the SCAN- side to tune in to a lower frequency. Press and keep two second minutes, scan automatically. 5.Master volume Controls the output level of all audio channels. 6.TEST Outputs the test tone to adjust the speaker levels. 7. SET MAIN MENU button Press these buttons to turn the unit into the SET MAIN MENU mode. Select an item of menu by using the or buttons. the name item of menu will be displayed on the display, then press the or buttons (or turn ADJUST knob on the panel) to adjust or set it' parameter or range. 8.DTS & DTS ES mode selection button Note: Input sources must be DTS or DTS ES-encoded. 9.DTS Neo:6 Cinema/Music mode selection button 10. POWER Press this button to set this in the standby mode.Press again turn on the power of this unit. 11.A/B/C/D Selects one of the 4 preset station groups (A to D), when the unit is in tuner mode. 12.Stores a station in the memory 13. MUTE Mute the sound. Press again to restore the audio out to the previous volume level. 14. DSP mode selection button 6 DSP modes: Live, Disco, Jazz, Classic, Hall, Rock. 15. Dolby Digital & Dolby Digital Surround EX mode selection button Note: Input sources must be Dolby digital or Dolby Digital Surround EX-encoded. 16. 2 channels stereo mode & 6 channels stereo mode selection button 17. Dolby Pro logic II Movie/Music mode selection button 18. SLEEP button Sets the sleep time:10min,20min,30min,40min, 50min,60min, 70min,80min,90min,100min,110min,120min. 16