Insignia IS-HC040917 User Manual (English) - Page 21

Operating Your Receiver Speaker Setting(Speaker Mode Settings) Use this feature to select suitable output modes for your speaker configuration. 1.Main Speakers Use the MENU button on the panel or the Left and Right or buttons on the remote to select "M SPEAK ",and turn the ADJUST knob on the panel or use the Up and Down or buttons on the remote to select position. Choices:LARGE,SMALL. Initial setting:LARGE. LARGE:If your main speakers have a high ability for bass reproduction. In this position, full range signals present at the main channels are output from the main speakers. SMALL: If your main speakers do not have a high ability for bass reproduction. However, if your system dies not include a subwoofe,do not select this position.In this position,low bass signals are output from the subwoofer speaker(100Hz). SMALL:Select this position if your front center speaker is smaller than the main speakers. In this position, low bass signals (100 Hz)at the front center channels are output from the subwoofer speaker,or output from left and right main speaker if the subwoofer speaker is in "N" position. NONE: Select this position if your system does not include a front center speaker. All of the front center channel signal are directed to the main speakers. DIGITAL HOME THEATER AMPLIFIER IS-HC040917 DSP Front Panel Remote Control MEMORY TUNED CD AUX TUNER DVD VIDEO TV VCR 6CH DIGITAL HOME THEATER AMPLIFIER IS-HC040917 DSP Front Panel Remote Control MEMORY TUNED CD AUX TUNER DVD VIDEO TV VCR 6CH 2.Front Center Speaker Use the MENU button on the panel or the Left and Right or buttons on the remote to select "FC SPEAK ",and turn the ADJUST knob on the panel or use the Up and Down or buttons on the remote to select position. Choices:LARGE,SMALL,NONE. Initial setting:LARGE. LARGE:Select this if the front center speaker is approximately the same size as the main speakers. The entire range of the front center signal is directed to the front center speaker. 3.Surround Left and Right Speakers Use the MENU button on the panel or the Left and Right or buttons on the remote to select "S SPEAK ", and turn the ADJUST knob on the panel or use the Up and Down or buttons on the remote to select position. Choices:LARGE,SMALL,NONE. Initial setting:LARGE. LARGE:Select this position if you have large surround left and right speakers or if a surrround subwoofer is connected to your surround speakers.The entire range of the front center signal is directed to the surround left and right speakers. SMALL:Select this position if your surround left and right speakers do not have a high ability for bas reproduction. In this position, low bass signals (100 Hz) at the surround left and right channels are output from the subwoofer speaker, or output from left and right main speaker if subwoofer speaker is in "N" position. NONE:Select this position if your system does not include the surround left and right speakers. All of the surround left and right channel signals are directed to the main speakers. 20