Insignia IS-HC040917 User Manual (English) - Page 20
Switching On / Off, To Adjust the Tone, Adjust High-frequency of Main Speakers - digital home theater
View all Insignia IS-HC040917 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Operating Your Receiver Switching On / Off To turn on POWER switch on the panel, the unit is standby mode, standby indicator light on the display is red, then, press either button on the panel or POWER button on the remote control. "WELCOME will be display on the display and left direction moving. Stop three seconds when the word pass the middle of display(flash three times),then left direction moving and enter working mode. DIGITAL HOME THEATER AMPLIFIER IS-HC040917 To Adjust the Tone You can adjust the tonal quanlity of your front left and right speakers or headphones(when connected). Adjust High-frequency of Main Speakers Turn the TREBLE knob on the panel to adjust high-frequency of main speaker.The parameter is increased when clockwise direction rotate the knob.The parameter is decreased when anticlockwise direction rotate the knob. Front Panel Remote Control MEMORY TUNED AUX TAPE TUNER DVD VIDEO TV VCR 6CH Adjust Low-frequencFyroonft MPaninelSpeakers Turn the BASS knob on the front panel to adjust low-frequency of main speaker.The parameter is increased when clockwise direction rotate the knob.The parameter is decreased when anticlockwise direction rotate the knob. STANDBY: when the receiver is on, press POWER button on the remote once to activate the standby mode (only by remote). Note: In standby mode, this unit consumes a small amount of power in order to receiver infrared-signals from the remote control. POWER OFF: Press POWER switch on the panel to turn off the unit . Front Panel 19