Insignia IS-HC040917 User Manual (English) - Page 27

Advanced Sound Control SLEEP Use the built-in SLEEP timer to automatically turn this unit into the standby mode after the time you set elapses. The SLEEP timer is useful when you plan to fall asleep while this unit is playing back or recording a source. 1.Press the SLEEP button repeatedly until the desired SLEEP time appears on the display. From 10 minutes to 120 minutes. DIGITAL HOME THEATER AMPLIFIER IS-HC040917 DSP Front Panel Remote Control MEMORY TUNED CD AUX TUNER DVD VIDEO TV VCR 6CH Remote Control MEMORY TUNED CD AUX TUNER DVD VIDEO TV VCR 6CH 2.To cancel the SLEEP: Press the SLEEP button repeatedly until SLEEP OFF appears on the display(VFD). Remote Control MEMORY TUNED CD AUX TUNER DVD VIDEO TV VCR 6CH Setting the Display Brightness Use the MENU button on the panel or the Left and Right or buttons on the remote to select "DIMMER 8" item.Turn the ADJUST knob on the panel or use the Up and Down or buttons on the remote to select a mode of dimmer. Automatic Audio Format Recognition When a digital source is playing, the receiver will automatically recognise source format to enter to the proper surround mode and light output speaker indicator on the left-hand side of the display(VFD). It is important to know,however that not all DTS or Dolby Digital sources are encoded with the full complement of five channels plus LFE*.Output speaker indicator show how many and which speaker you have enabled and the letters inside output speaker indicator show which channel is present in the source information. *LFE stands for Low Frequency Effect. The indication"LFE" appears if the digital source contains LFE information. In this case, the bass signal will be delivered to the subwoofer, offering more dynamic deep bass sound effects. The Rule for Listen Mode Display This unit detects digital signal sources and selects the corresponding playback mode automatically, but can be manually changed to a different playback mode.The new mode will remain in effect until a differently formatted source is played. For instance, if you play a DTS - encoded DVD, DTS decoding mode is automatically selected. If you manually change to DTS STEREO mode, the unit will remain in DTS STEREO mode until you change the mode manually or play a differently formatted source. 26