Insignia IS-HC040917 User Manual (English) - Page 35

Advanced Sound Control Adjusting the DTS, Dolby Digital LFE Level This adjustment is effective only when DTS, DTS ES, DOLBY DIGITAL or DOLBY DIGITAL SURROUND EX is decoded and the signals of the selected source encoded with DTS, DTS ES, DOLBY DIGITAL and DOLBY DIGITAL SURROUND EX contain LFE signals. Adjusts the output level at the LFE (low frequency effect) channel. If the LFE signals are mixed with signals of other channels and they are output from the same speakers, the ratio of LFE signals to other signals can be adjusted. DOLBY DIGITAL,DOLBY DIGITAL SURROUND EX LFE level control range: -10dB to 00 dB. Preset value: 00dB. DTS,DTS ES LFE level control range: -10dB to 00 dB. Preset value: 00dB. 1.Play source which-encoded you want to adjust the LFE level. 2.Use the MENU button on the panel or the Left and Right or buttons on the remote so that "XX LFE XXdB" appears on the front panel display. 3.Turn the ADJUST knob on the panel or use the Down and Up or buttons on the remote to adjust LFE level. Dynamic Range(Night Mode) By using Dynamic Range Compression technology, you can enjoy enhanced sound quality by Dolby digital at night without interrupting your roommates or neighbors. While enjoying a Dolby Digital enabled component(DVD,DVB),you can activate Night Mode by pressing MENU button on the remote control or panel,and this mode will compress the difference in volume between normal voices and sounds like explosions. Use the MENU button on the panel or the Left and Right or buttons on the remote to select the parameter of dynamic range. DSP Front Panel Remote Control MEMORY TUNED CD AUX TUNER DVD VIDEO TV VCR 6CH 2.Turn the ADJUST knob on the panel or use the Down and Up or buttons on the remote to setparameter required. Choices:MAX(maximum),STD(standard),MIN(minimum). Initial setting:STD(standard). Front Panel DSP Remote Control MEMORY TUNED CD AUX TUNER DVD VIDEO TV VCR 6CH MEMORY TUNED CD AUX TUNER DVD VIDEO TV VCR 6CH Front Panel DSP Remote Control Notes: Night Mode can be functioned ONLY during Dolby Digital,Dolby Digital EX playback. To play Dolby Digital,Dolby Digital EX,DTS, DTS ES, you MUST Connect the DVD to your receiver with DIGITAL signal (Coaxial or Optical).the Sound Source (DVD software)MUST be Dolby Digital,Dolby Digital EX,DTS,DTS ES encoded. 34