Insignia IS-HC040917 User Manual (English) - Page 25

Operating Your Receiver Speaker Level Calibration Here you can adjust the level of each speaker with the built-in test tone so that the volume of each speaker is the same at the listening position. Note: The speakers cannot be calibrated while the output of this unit is muted, while a pair of headphones is connected, or when using the multichannel input. 1.Press the TEST button on the remote control or panel, you will hear a test tone (like pink noise) from front left speaker, then front center speaker, then front right speaker, then surround right speaker, surround center, then surround left speaker, and then the subwoofer speaker. DIGITAL HOME THEATER AMPLIFIER IS-HC040917 DSP Front Panel Remote Control MEMORY TUNED CD AUX TUNER DVD VIDEO TV VCR 6CH 2.Use the MENU button on the panel or the Left and Right or buttons on the remote to select the speaker you want to adjust. Turn the ADJUST knob on the panel or use the Up and Down or buttons on the remote to set the volume.The volume can be adjusted from -10 to +10 dB in 1 dB steps. DIGITAL HOME THEATER AMPLIFIER IS-HC040917 DSP Front Panel Remote Control MEMORY TUNED CD AUX TUNER DVD VIDEO TV VCR 6CH 3.Repeat step 2 until the volume of the test tone from each speaker is the same. 4.After adjustment, press TEST again on the remote control or panel to exit testing mode. (Front Left channel) (Front Center channel) (Front Right channel) (Surround right channel) (Surround center channel ) (Surround left channel) (Subwoofer channel) 24