Insignia NL19W2QP-10A User Manual (English) - Page 17

Connecting an audio amplifier To connect an audio amplifier: • Connect an audio cable to the AUDIO OUT L and R jacks on the back of your TV and to the AUDIO IN jacks on the amplifier. Audio Amplifier Turning on your TV for the first time The first time you turn on your TV, the Setup Wizard opens. The Setup Wizard guides you through setting up basic settings including the menu language, TV signal source, and the channel list. To set up your TV: 1 Make sure that you have: • Installed the remote control batteries. (See page 7 for details). • Connected an antenna, cable TV, or satellite TV. (See pages 8 and page 9 for details.) • Connected the power cord. (See page 8 for details.) 2 Press (power) to turn on your TV. The Choose your menu Language screen opens. Back of TV English Français Español 3 Press or to highlight English, Français, or Español, then press ENTER to confirm your selection. The Choose your TV source screen opens. Choose your TV source Antenna Cable Cable/Satellite box 0 Analog Channels 0 Digital Channels Scan for channels MOVE OK ENTER SELECT MENU PREVIOUS Select Antenna If using an antenna for standard or HD TV EXIT EXIT 4 Press or to highlight Antenna, Cable, or Cable/Satellite box (if your cable TV uses a box, select Cable/Satellite box), then press ENTER. If you chose Antenna or Cable, your TV automatically starts scanning for channels available in your viewing area. If you chose Cable/Satellite box, your TV does not need to scan for channels. When the scan is complete, the Setup Wizard closes automatically. Note You can change the menu language or scan for channels at a later date. For more information, see "Selecting the menu transparency" on page 29 or "Automatically scanning for channels" on page 18. www.insigniaproducts.com 13