Insignia NS-DVDR1 User Manual (English) - Page 16
Using the Setup Menu - manual
View all Insignia NS-DVDR1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
NS-DVDR1 DVD Recorder Menu Available options Photo (See "Photo List menu options" on page 19) • DISC: Displays the Photo menu for a disc. Music (See "Audio CD and Music menu options" on page 18) • DISC: Displays the Music (or Audio CD) menu for a disc. Easy Menu • Dubbing: Displays the Dubbing menu. • Disc Manager: Displays the Disc Setup menu. • Rec. Mode: Displays the Record Mode setup menu. • DV Input: Changes to DV Input mode. Using the Setup Menu In this menu system there are several ways to customize the settings. Most menus consist of three levels to set up the options, but some require more levels for some settings. To change settings using the Setup menu: 1 Press HOME. The Home menu opens. 2 Select SETUP and Start, then press ENTER. The Setup menu opens with the General Settings icon highlighted. 3 Press / to select the option you want, then press to move to the second level. 4 Press / to select the second option you want, then press to move to the third level. 5 Press / to select the setting you want, then press ENTER to confirm your selection. Some items require additional steps. 6 Press RETURN or HOME to exit the Setup menu. Note Press to go back to the previous level. Menu General Settings Language Settings Audio Settings Available settings Tuning Band-You can select TV or CATV. Auto Channel Set-Press Start to begin auto channel selection. CH. Add/Del-You can manually add or erase channels from memory. Clock Set-You can manually or automatically (using XDS) set the clock. TV Aspect-You can select from 4:3 Letter box, 4:3 Pan scan, or 16:9 Wide. Progressive Scan-You can turn on progressive scan video, which provides the highest quality pictures with less flickering. If you are using the Component Video Out/ Progressive Scan jacks, but are connecting the recorder to a standard (analog) television, set Progressive Scan to OFF. If you are using the Component Video Out/ Progressive Scan jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to ON. Caution: Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set progressive scan to ON by mistake, you must reset the recorder. To do this, remove the disc, then press STOP ( ) and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor. Power Save Mode-You can set Power Save Mode to ON to enable an economic power save mode. Factory Set-You can reset your recorder to original factory settings. Display Menu-You can select a language for the setup menu and information display. Disc Menu-You can select a language for the DVD menu. Disc Audio-You can select a language for the DVD audio. Disc Subtitle-You can select a language for the DVD subtitle. Dolby Digital/DTS/MPEG-You can select Bitstream (if you connect to equipment with Dolby Digital, DTS, or MPEG decoder), or PCM (to automatically downmix to two-channel PCM audio). Sampling Freq.-You can select 96 kHz or 48 kHz (if your receiver or amplifier is not capable of decoding 96 kHz signals). DRC (Dynamic Range Control)-You can set the DRC to On if you want to listen to a movie at a lower volume, without losing clarity. Vocal-You can set the Vocal to ON when a multi-channel karaoke DVD is playing. This mixes the karaoke channels on the disc into normal stereo sound. 14 www.insignia-products.com