Insignia NS-DVDR1 User Manual (English) - Page 33

NS-DVDR1 DVD Recorder The recorder does not start playback No disc is inserted An unplayable disc is inserted Insert a disc (make sure that the disc indicator in the display window is lit) Insert a playable disc. (Check the disc type and Regional code.) The disc is placed Place the disc with the upside down playback side down The disc is not placed within the guide Place the disc on the disc tray correctly inside the guide The disc is dirty Clean the disc The Rating level is Cancel the Rating function or set change the rating level The remote control does not work correctly There is an obstacle in the path of the remote control and your recorder Remove the obstacle The batteries in the Replace the batteries with new remote control are ones exhausted The remote control is not pointed at the remote sensor of the recorder Point the remote control at the remote sensor of the recorder The remote control Operate the remote control is too far from the within 23ft (7m) recorder The camcorder image is not shown The camcorder is off Turn camcorder on and operate it correctly The camcorder image is not shown on TV screen The recorder's source is set incorrectly Use INPUT to select the correct input channel (AV1, AV2 or DV IN) Timer The recorder clock recording is is not set to the not possible correct time Set the clock to the correct time The timer has been Reprogram the Timer programmed incorrectly The TIMER Record indicator light does not appear after programming the timer Reprogram the Timer and turn off the recorder to enable the timer Picture or sound of a channel is weak or missing Antenna or cables are loose Wrong tuning band is selected in the Recorder Setup menu. Tighten connections or replace the cable Try Tuning Band Select options. See "Using the Setup Menu" on page 14 Cannot play disc a recorded on your recorder on another DVD player. The disc was recorded in Video mode Some players will not play even a finalized disc recorded in Video mode Finalize the disc. See "Disc Settings" on page 15. No solution The disc was recorded in VR mode The other player must be RW compatible in order to play the disc Discs recorded with copy-once material cannot be played on other players No solution Cannot record or did not record successfully The remaining blank space on the disc is insufficient The source you are trying to record is copy-protected Use another disc You cannot record the source When setting the recording channel, the channel is tuned on the TV's own tuner. Select the channel on the recorder's built-in TV tuner by setting the TV tuner to the recorders RF output channel. When recording to a Video mode disc, programs that are copy-once protected cannot be recorded Use a VR mode formatted disc for copy-once material Stereo Audio Record or Playback is not present TV is not Stereo-compatible Broadcast program is not in stereo format No solution No solution Recorder A/V Out jacks are not connected to TV A/V In jacks Make A/V connections. Stereo is available only on A/V output from recorder. Recorder Audio/Video Out is not selected for viewing at the TV Select AUX or A/V source as TV input Recorder's TV Set TV audio channel mode to audio channel is set Stereo. See "Changing the TV to SAP or MONO. audio channel" on page 16. www.insignia-products.com 31