Insignia NS-LTDVD19 User Manual (English) - Page 18
Maintaining, Troubleshooting - power supply
View all Insignia NS-LTDVD19 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Preference Page Note The Preference page only opens when no disc is in the disc tray. Insignia NS-LTDVD19 19" LCD TV/DVD Combo Handling discs A dirty, scratched, or warped disc may cause skipping or noise. To care for discs: Option Description Parental Password Default Turns parental controls on or off and sets the rating level. The rating level you select and all higher ratings are blocked. You can select: • 1 Kid Saf • 2G • 3 Pg • 4 Pg 13 • 5 Pgr • 6R • 7 Nc17 • 8 Adult When you select the Parental option, you must enter the password. The default password is 1234. Sets the password. The password must be four digits. The first time you select this option, press the number keys to enter 1234, then press the number keys to enter your new password twice. If you forget your password, enter 1369. Reset all settings (except the password and parental rating level) to the factory defaults. Select this option, then press PLAY/ENTER. Maintaining Cleaning the cabinet Wipe the front panel and other exterior surfaces of your LCD TV/DVD combo with a soft cloth lightly dampened with lukewarm water. Never use a solvent or alcohol to clean your LCD TV/DVD combo. Do not spray insecticide near your LCD TV/DVD combo. Such chemicals may cause damage and discoloration to the exposed surfaces. • Hold discs by their edges. • Store discs in their cases when you are not using them. • Do not expose discs to direct sunlight, high humidity, high temperature, or dust. Prolonged exposure to extreme temperatures can warp discs. • Do not stick labels or tape on discs. To clean a disc: • With a soft cloth, wipe the disc from the center to the outer edge. Caution Do not use detergent or abrasive cleaning agents. They will damage the disc surface. Troubleshooting Symptom No picture and no sound Blank screen No sound Poor sound Solution • Make sure that your LCD TV/DVD combo is plugged into a power outlet. • Make sure that the power outlet is supplying power. • Make sure that you have selected the correct video source. Press INPUT to select the video source. • If the power has been interrupted, turn off your LCD TV/DVD combo, then turn it on again. • Press MUTE to make sure that the sound is not muted. • Press VOL+ to increase the volume. • Change the channel to determine if the current channel is having difficulties. • Adjust the sound settings. • If you have connected a sound system, make sure that it is adjusted correctly. 16 www.insignia-products.com