Intel D5400XS Product Guide - Page 38

Installing an MCH Heat Sink Fan (Optional

Get Intel D5400XS - Desktop Board Extreme Series Motherboard PDF manuals and user guides
UPC - 735858198684
View all Intel D5400XS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Intel Desktop Board D5400XS Product Guide Installing an MCH Heat Sink Fan (Optional) If your system application requires more MCH cooling than is provided by the MCH passive heat sink, you can add a cooling fan to the MCH passive heat sink by using the included MCH heat sink fan mounting bracket. This fan mounting bracket is designed to accommodate a 40 mm x 10 mm or 40 mm x 20 mm, 12 V dc fan. Use the board's 3-pin MCH fan header to supply power to the MCH fan. NOTE An MCH heat sink fan is not included with Desktop Board D5400XS and must be purchased separately. To install an MCH heat sink fan, follow these instructions: 1. Observe the precautions in "Before You Begin" on page 29. 2. Attach the fan (Figure 16, A) to the fan mounting bracket (Figure 16, B) using the fasteners (Figure 16, A) supplied with the fan. Slide the four legs of the bracket over the heat sink fins (Figure 16, C) and push down until the bracket "clicks" into place. 3. Attach the fan power connector to the MCH fan header (Figure 16, D). Figure 16. Installing a Typical MCH Heat Sink Fan 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Intel Desktop Board D5400XS Product Guide
38
Installing an MCH Heat Sink Fan (Optional)
If your system application requires more MCH cooling than is provided by the MCH
passive heat sink, you can add a cooling fan to the MCH passive heat sink by using the
included MCH heat sink fan mounting bracket.
This fan mounting bracket is designed
to accommodate a 40 mm x 10 mm or 40 mm x 20 mm, 12 V dc fan.
Use the board’s
3-pin MCH fan header to supply power to the MCH fan.
NOTE
An MCH heat sink fan is not included with Desktop Board D5400XS and must be
purchased separately.
To install an MCH heat sink fan, follow these instructions:
1.
Observe the precautions in "Before You Begin" on page 29.
2.
Attach the fan (Figure 16, A) to the fan mounting bracket (Figure 16, B) using the
fasteners (Figure 16, A) supplied with the fan.
Slide the four legs of the bracket
over the heat sink fins (Figure 16, C) and push down until the bracket “clicks” into
place.
3.
Attach the fan power connector to the MCH fan header (Figure 16, D).
Figure 16.
Installing a Typical MCH Heat Sink Fan