Intel SE7221BA1 Product Specification - Page 46
Power Supply Connectors - e support processors
View all Intel SE7221BA1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Connections and Jumper Blocks Intel® Entry Server Board SE7221BA1-E TPS Power (+5 V DC) One D− USB Port D+ Ground Key (no pin) 1 2 3 4 5 6 7 8 10 Power (+5 V DC) D− One USB D+ Port Ground No Connect OM15963 Figure 15. Connection Diagram for Front Panel USB Connectors 6.1.4 Power Supply Connectors The board has three power supply connectors: • Main power - a 2 x 12 connector. This connector is compatible with 2 x 10 connectors previously used on Intel® Server boards. The board supports the use of ATX12V or EPS 12V power supplies with either 2 x 10 or 2 x 12 main power cables. When using a power supply with a 2 x 10 main power cable, attach that cable on the right most pins of the main power connector, leaving pins 11, 12, 23, and 24 unconnected. • ATX12V power - a 2 x 2 connector. This connector provides power directly to the processor voltage regulator and must always be used. Failure to do so will prevent the board from booting. Table 20. Main Power Connector Pin Signal Name 1 +3.3 V 2 +3.3 V 3 Ground 4 +5 V 5 Ground 6 +5 V 7 Ground 8 PWRGD (Power Good) 9 +5 V (Standby) 10 +12 V 11 +12 V 12 2x12 connector detect Pin Signal Name 13 +3.3 V 14 -12 V 15 Ground 16 PS-ON# (power supply remote on/off) 17 Ground 18 Ground 19 Ground 20 No connect 21 +5 V 22 +5 V 23 +5 V 24 Ground 36 Revision 1.5