Intel SR1560SF Service Guide - Page 73
Replacing the Power Supply
UPC - 735858196017
View all Intel SR1560SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
1. Locate the battery and insert the tip of a small flat bladed screwdriver, or an equivalent, under the tab in the plastic retainer. Gently push down on the screwdriver to lift the battery. 2. Remove the battery from its socket. AF002375 Figure 56. Replacing the Backup Battery 3. Dispose of the battery according to local ordinance. 4. Remove the new lithium battery from its package, and, being careful to observe the correct polarity, insert it in the battery socket. Note: You will need to run BIOS Setup to restore the system configuration settings to the RTC. Replacing the Power Supply Caution: The power supply is not hot-swappable. Before removing or replacing the power supply, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. Intel® Server System SR1560SF Service Guide 51