Intel SR1560SF Service Guide - Page 76
Replacing the Control Panel Module Fixed Drive, System
![]() |
UPC - 735858196017
View all Intel SR1560SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Replacing the Control Panel Module (Fixed Drive System) Your server must be operated with a control panel installed. Caution: The control panel is NOT hot-swappable. Before removing or replacing the control panel, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. 1. Unplug the USB cable from the server board (see letter "A"). 2. Unplug the front panel cable from the server board (see letter "B"). 3. Remove the cables from the retaining clip on the fan board (see letter "C"). 4. Press the latch at the back of the control panel (see letter "D"). 5. Slide the control panel out through the front of the server system (see letter "E"). A C D B E AF002344 Figure 61. Removing the Control Panel Module (Fixed Drive System) 54 Intel® Server System SR1560SF Service Guide
![](/manual_guide/products/intel-sr1560sf-service-guide-e853013/76.png)