Intel SR1690WB Service Guide - Page 60
Installing and Removing a PCI Add-In Card, Installing a PCI Add-In Card
![]() |
UPC - 735858210980
View all Intel SR1690WB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
A B AF003323 Figure 32. Installing the PCI Riser Assembly 3. Press down uniformly until the two hooks on the rear of the PCI riser assembly engage the server system back panel slots. The riser card will seat into the matching socket on the server board. Ensure the riser card is fully seated. Installing and Removing a PCI Add-In Card The following instructions describe how to install and remove a PCI add-in card. Installing a PCI Add-In Card Peripherals and add-in cards are not included in your system. You must purchase them separately. The riser card supports a full-height or low-profile PCI Express* 2.0 x8 add-in card. 1. After removing the PCI riser assembly from the server system, remove the screw that attaches the PCI bracket shield to the rear of the chassis to remove the shield. Retain the screw. 2. Insert the PCI card edge connector in the slot on the PCI riser. 42 Intel® Server System SR1690WB Service Guide
![](/manual_guide/products/intel-sr1690wb-service-guide-33a770e/60.png)