Intel SR1690WB Service Guide - Page 69
Removing the Intel® RMM3 and Intel® RMM3 NIC, Replacing the Backplane Board, Removing the Intel
![]() |
UPC - 735858210980
View all Intel SR1690WB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
B A C DevOicpetical AF003316 Figure 41. Attach the Intel® RMM3 module to rear chassis Removing the Intel® RMM3 and Intel® RMM3 NIC Use the reverse steps to remove the Intel® RMM3 module 1. Remove the two screws from rear chassis to loosen Intel® RMM3 board (see letter "C"). 2. Plug out Intel® RMM3 NIC module cable from the server board (see letter "B"). 3. Install the Intel® RMM3 NIC module cover into the system back panel (see letter "A"). Replacing the Backplane Board The instructions below describe how to replace the backplane board in the system. Intel® Server System SR1690WB Service Guide 51
![](/manual_guide/products/intel-sr1690wb-service-guide-33a770e/69.png)
Intel
®
Server System SR1690WB Service Guide
51
Figure 41. Attach the Intel
®
RMM3 module to rear chassis
Removing the Intel
®
RMM3 and Intel
®
RMM3 NIC
Use the reverse steps to remove the Intel
®
RMM3 module
1.
Remove the two screws from rear chassis to loosen Intel
®
RMM3 board (see letter
“C”).
2.
Plug out Intel
®
RMM3 NIC module cable from the server board (see letter “B”).
3.
Install the Intel
®
RMM3 NIC module cover into the system back panel (see letter
“A”).
Replacing the Backplane Board
The instructions below describe how to replace the backplane board in the system.
Optical
Device
A
B
AF003316
C